Todo List

Global CConfigFiles::ihxOpen (string fileName)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::ihxRead (byte *b)

Change to Logging!!

Global CConfigFiles::xbtOpen (string fileName)

Instead of using a static offset search for the sync pattern!!

Global CUsbpCyUSB::deviceInfo (void)

StatusReport or Logging, no printfs!!

Global CUsbpCyUSB::controlWrite (byte reqCode, unsigned short value, unsigned short index, byte *b, int len, int timeout)

Fix this, think it needs fixing in the firmware.

Global FX2LP_8051::downloadFirmware (string file, int vid, int pid)

stdio??

Global FX2LP_8051::downloadFirmware (string file, int vid, int pid)

add readback to verify

Global iUSB_Driver::bulkWrite (int ep, int size, byte *b)=0

move to the controller specific!!

Global USB_FPGA::writeData (byte *b, int len)

use configuration, endpoint and transfer type.

Global USB_FPGA::writeData (byte *b, int len)

Catch errs, if data bulk, reset, retry.

Global USB_FPGA::readData (byte *b, int len)

use configuration, endpoint and transfer type

Global USB_FPGA::readData (byte *b, int len)

catch errors

Global USBP_PBRD_V01::testXferLoopback (int x)

Add FPGA loopback to test USB xfer rates.

Global USBP_PBRD_V01::testXferLoopback (int x)

Add some kind of verification that loopback code is loaded.

Global USBP_PBRD_V01::testXferLoopback (int x)

Configure for LoopBack Mode.

Global XILINX_XS3::downloadConfigFile (string file)

Remove all

Global err_code_str

create a class for the error codes and strings.

---